How to Switch Payroll Providers Without Breaking a Pay Run

How to Switch Payroll Providers

By Natasha Silveira | 8 October 2026 | 11 min read

TL;DR

  • Plan the switch over six to eight weeks. Never pick a go-live date in the middle of a busy pay cycle.
  • Clean your employee data, leave balances and year-to-date figures before anything moves.
  • Run at least one parallel pay run and fix every difference before you go live.
  • Follow the ATO rules for year-to-date amounts so employees don’t end up with duplicate income statements.
  • Payday Super leaves seven business days to get super to funds, so test super payments early.

It’s Thursday afternoon. Payday is tomorrow, and your new payroll system has just calculated a casual’s weekend penalty rates at the ordinary rate. Nobody noticed until the bank file was ready to send.

That’s the fear that keeps business owners stuck with payroll software or a provider they’ve outgrown. When you switch payroll provider in Australia, the risk isn’t the new system. It’s the gap between the old one and the new one. This guide walks through a six-step migration process, the Single Touch Payroll rules you can’t skip, and the mistakes that cause a missed or wrong pay run.

Why switching payroll feels so risky

Payroll is the one business process your staff check every single week. A late invoice is an annoyance. A late or short pay packet damages trust overnight, and it can become a legal problem fast.

Underpayments are already common without a migration in the mix. The Fair Work Ombudsman recovered $358 million for more than 249,000 underpaid workers in 2024-25. Many of those cases started with a payroll setting that was wrong for months before anyone looked.

A migration multiplies that risk for a short window. Every award rule, allowance, leave balance and super setting has to be rebuilt or carried across. If one is wrong, the new system will repeat the error every pay run until someone spots it.

The good news is that most migration failures are predictable. They come from rushing the go-live date, skipping data clean-up or treating the first live pay run as the test. A planned switch is far safer than limping along with a system that already makes mistakes.

Signs it’s time to move

Most businesses don’t switch on a whim. They switch because the current setup keeps costing time or money. Common triggers include:

  • Staff spend hours fixing pay runs by hand each cycle.
  • The software can’t interpret your award or enterprise agreement.
  • Your provider is slow to answer when a pay question comes up.
  • You’ve grown past what the system or provider can handle.

If you’re still weighing up options, our guide on how to choose the right payroll provider in Australia covers what to compare before you sign.

Rushed switch vs planned switch

Rushed switch

✓

Go-live picked for convenience: The date suits the vendor, not your pay calendar or reporting deadlines.

✓

Data copied as is: Old errors in rates, leave balances and tax details move straight into the new system.

✓

First live run is the test: Problems show up on employee payslips instead of in a trial run.

Planned switch

✓

Go-live set at a clean break: Ideally the start of a quarter or financial year, after a normal pay run.

✓

Data audited first: Rates, classifications and balances are checked and signed off before the import.

✓

Parallel runs compared: Old and new systems produce matching results before anyone is paid from the new one.

How to switch payroll provider in Australia: the 6-step process

Here’s the sequence we use with clients. It works whether you’re moving to new software, moving to an outsourced provider, or both.

  1. Choose a go-live date that falls at a clean break.
  2. Audit and clean your payroll data.
  3. Set up awards, pay codes, leave and super in the new system.
  4. Run at least one parallel pay run.
  5. Handle the Single Touch Payroll handover.
  6. Go live, then reconcile the first month.

Step 1: Pick the right go-live date

The cleanest switch is at the start of a financial year, because year-to-date figures start from zero. That isn’t always possible. The next best option is the start of a quarter, straight after a normal pay run. Avoid public holiday weeks, Christmas, and the June and July rush.

Step 2: Audit and clean your data

Export everything from the old system: employee details, tax file number declarations, bank accounts, super funds, pay rates, award classifications, leave balances and year-to-date totals. Check each record against your contracts and your award. This is where most hidden underpayments surface, so budget real time for it.

Step 3: Set up the new system properly

Build pay codes, penalty rates, allowances and leave rules from your award or agreement, not from the old system’s settings. If the old settings were wrong, copying them only moves the problem. Confirm every pay code maps to the correct Single Touch Payroll Phase 2 category.

Step 4: Run parallel pay runs

Process the same pay period in both systems and compare gross pay, tax, super and leave accruals for every employee. Investigate every difference, even small ones. One parallel run is the minimum. Two is better if you have shift workers or several awards.

Steps 5 and 6: STP handover, go-live and reconcile

The STP rules are detailed enough to need their own section below. Once you’re live, reconcile the first month’s payroll against your bank, your general ledger and super payments. Keep read-only access to the old system for at least the rest of the financial year.

A typical payroll migration timeline

8 weeks

Before go-live: choose the date, sign the provider and export your data

6 weeks

Audit rates, classifications, leave balances and year-to-date totals

4 weeks

Build pay codes, awards, leave rules and super settings

2 weeks

Run parallel pay runs and fix every difference

30 days

After go-live: reconcile pay, STP and super, then close the old system

Source: VeiraMal payroll migration practice; ATO Single Touch Payroll Phase 2 employer reporting guidelines

Getting Single Touch Payroll right when you change

This is the step most businesses get wrong, and the one employees notice at tax time. If year-to-date amounts are reported twice, an employee can see two income statements in myGov and double the income.

The ATO’s guidance on changing your payroll solution gives you two main paths when you move mid-year.

  • Don’t transfer year-to-date amounts. You don’t need to tell the ATO. Employees get a second income statement for the new system, and you must finalise both.
  • Transfer year-to-date amounts. Where your old software allows it, send an update event zeroing out the old figures first. Then report the transferred totals from the new system.

If you can’t zero out the old figures, the ATO lets you send an update event that includes your previous BMS ID or Payroll IDs. That links the old and new records so they aren’t counted twice.

Ask your new provider which method their system supports before you sign. Some products handle the transfer for you. Others leave it to you, and a few can’t zero out at all.

Finalise every combination

You must finalise STP for each combination of ABN, branch, BMS ID and Payroll ID, and the deadline is 14 July. If there’s any chance you’ll lose access to the old system, finalise those records when you switch rather than waiting until June. Our article on STP Phase 2 errors that trigger an ATO review covers other reporting traps worth checking at the same time.

“

Outsourcing my HR to the highly professional Natasha Silveira at VeiraMal saved us about $30k annually and gave me back hours every week I was spending on compliance I didn’t understand.

S

Steve

properT Network

Common payroll migration mistakes

Most of the problems we fix after a switch fall into a short list. Check each one before your go-live date:

  • Leave balances moved without checking. Wrong annual or personal leave balances become a dispute at termination.
  • Award rules copied, not rebuilt. Old errors in penalty rates or allowances carry straight across.
  • Super fund details missing. Unmatched fund or member details cause rejected contributions.
  • Pay codes mapped to the wrong STP category. Allowances and overtime end up reported as ordinary pay.
  • Old system closed too early. You lose the records needed to finalise STP or answer an audit.
  • Staff not told. Employees panic when payslips look different and nobody explained why.

That last one is easy to fix. Send a short note before the first pay run explaining the new payslip layout, the new login and who to contact with questions. It saves a week of anxious emails.

Keep a simple migration log as you go. Note each decision, each data correction and who signed it off. If a pay question comes up six months later, you’ll know exactly what changed and why.

Don’t forget the people side

Someone in the business has to own the switch. In most SMEs that’s the owner, the office manager or the bookkeeper, on top of their usual work. Block out time for them in the weeks before go-live, because data checks and parallel runs can’t be squeezed into a lunch break.

Planning a payroll switch this year?

A short call with VeiraMal will map out your go-live date, data clean-up and STP handover before you sign with a new provider.

Book Your Free Discovery Call

Quick scorecard: Is your current payroll system worth keeping?

Tick every item that applies to your business.






Payday Super leaves less room for error

Timing matters more now than it did a year ago. Under Payday Super, employers must pay super at the same time as wages for earnings paid from 1 July 2026. The ATO says contributions must reach the employee’s fund within 7 business days of payday.

That changes how you test a new system. Under quarterly super, a broken fund connection could go unnoticed for weeks. Now a rejected contribution can make you late within days. During your parallel runs, check that super files generate correctly and that each fund accepts them.

The stakes are real. The ATO estimates the superannuation guarantee gap at around $6.2 billion, or 6 per cent, for 2022-23. Separate analysis from the Super Members Council found 28 per cent of workers were underpaid super in 2023-24, with an average shortfall of $1,850.

A migration is the best chance you’ll get to fix super settings properly. Check super on overtime, allowances and leave while you rebuild pay codes, not after an employee complains.

Also confirm how your new system handles super for salary sacrifice arrangements. Sacrificed super still has to be paid on time, and it can’t reduce the amount you owe under the super guarantee.

New software or outsourced payroll?

Before you move, ask a simple question. Is the problem the software, or the time and skill it takes to run it? New software won’t help if nobody in the business has time to keep award rates and pay codes current.

Outsourcing moves the processing, the STP reporting and the award interpretation to a specialist. You still approve each pay run, but someone else does the checking. For many businesses with 5 to 50 staff, that costs less than the hours an owner or office manager spends fixing payroll each month.

VeiraMal’s outsourced payroll services include payroll system selection, set-up and migration, so the switch and the ongoing processing sit with one team. If you also need help with contracts, policies or difficult staff issues, our outsourced HR services work alongside payroll.

Questions to ask before you sign

Whichever way you go, get clear answers to these before you commit:

  • Who sets up our award rules, and who checks them?
  • How do you handle the STP transfer of year-to-date amounts?
  • Will you run parallel pay runs with us, and how many?
  • What does migration cost, and what’s billed separately?

A provider who can’t answer these plainly is likely to leave the hard parts with you.

Free Download: Payroll Migration Checklist

A step-by-step checklist for Australian businesses moving payroll software or providers, from data audit to STP finalisation.

Download Free Checklist

Want a quick read on whether to fix your current setup or move? Send VeiraMal a message through the contact form or email info@veiramal.com, and we’ll come back to you with a plain answer.

How VeiraMal Works

1

Discovery Call

A free conversation about your payroll setup and where the risk sits.

2

Threshold Review

Pay rates, data and STP settings checked before anything moves.

3

Ongoing Support

Advice on call when the difficult conversations arrive.

Frequently asked questions

Can I change payroll provider in the middle of the financial year?

Yes. Many businesses switch mid-year. You need to decide whether to transfer year-to-date amounts to the new system. If you transfer them, follow the ATO’s process so the old and new figures aren’t counted twice, usually by zeroing out the old records first. If you don’t transfer them, employees will see a second income statement, and you must finalise STP for both the old and new systems by 14 July.

How long does it take to switch payroll providers?

For a small or medium business, plan for six to eight weeks from signing with the new provider to your first live pay run. That allows time to export and audit your data, set up awards and pay codes, and run at least one parallel pay run. Businesses with several awards, shift workers or multiple entities may need longer. Rushing the timeline is the most common cause of errors in the first few pay runs.

What data do I need to move to a new payroll system?

You’ll need employee personal details, tax file number declarations, bank accounts, super fund and member details, pay rates and award classifications. You also need leave balances, year-to-date earnings, tax and super totals, and any recurring deductions or salary sacrifice arrangements. Check each item against contracts and your award before importing. Keep a copy of the original export as a record of what was transferred.

Do I need to tell the ATO when I change payroll software?

Not always. If you don’t transfer year-to-date amounts, you don’t need to tell the ATO. If you do transfer them and your BMS ID changes, you need to report it. The ATO prefers that you zero out the old figures with an update event before reporting the transferred amounts. If that isn’t possible, you can send an update event that includes your previous BMS ID or Payroll IDs.

What happens to super when I switch payroll systems?

Super still has to be paid on time, and under Payday Super it must reach the employee’s fund within 7 business days of payday. Before go-live, confirm every employee’s fund details are correct in the new system and that super files are accepted. Check that super is calculated on the right earnings, including overtime and allowances where required. Test this during your parallel pay runs, not on the first live payday.

Switch payroll providers without missing a pay run

VeiraMal reviews your headcount, contracts, policies and termination process against the obligations that actually apply to your size. Businesses in Melbourne, Sydney and Hobart.

Book Your Free Discovery Call

Melbourne: Level 2, 480 Collins Street, VIC 3000
Sydney: Level 26, 44 Market Street, NSW 2000
Hobart: Level 6, Reserve Bank Building, 111 Macquarie Street, TAS 7000
info@veiramal.com

Thoughts from an HR expert

Stay informed with Tash Talks

Explore our monthly blogs for expert insights into industry trends and legislative updates, including HR advice Australia.

Book a free consultation

Interested to see how our HR solutions can propel your business to new heights?